Ivoclar Programat P200 Manual [Premium]

| Material | Program name | Key manual note | |----------|--------------|----------------| | IPS e.max CAD crystallisation | e.max CAD | Use slow cooling for full translucency | | IPS e.max Press (invested) | e.max Press | Do use vacuum during pressing | | Zirconia (standard) | Zirlux 16 | Ramp rate 8–12°C/min – slower for >20mm spans | | Zirconia (high translucency) | Zirlux HT | Lower final temp by 10–15°C vs standard |

Drop a comment or DM us. Disclaimer: This post is a technician’s summary. Always refer to the official Ivoclar Programat P200 manual for exact procedures and safety information. Ivoclar Programat P200 Manual

| Part | Interval (manual recommendation) | |------|----------------------------------| | Sintering tray | Every 50 cycles – inspect for cracks | | Thermocouple | Replace every 2 years or 500 cycles | | Heating elements | ~1000 cycles or when ramp time increases 20% | | Glass door seal | Monthly – clean with isopropyl alcohol | | Vacuum pump oil | Every 6 months (if external pump) | | Material | Program name | Key manual

If you work with high-translucency zirconia or lithium disilicate, you’ve likely seen the Ivoclar Programat P200 . It’s a compact, high-temperature furnace designed for speed and precision. But here’s the catch: assuming it works like a standard porcelain furnace can ruin a case. Deep Dive: The Ivoclar Programat P200 – A

Deep Dive: The Ivoclar Programat P200 – A Manual Worth Reading (Even for Pros)

Warning directly from the manual: “Contaminated trays (from glaze, saliva, or investment) will poison platinum-rhodium elements.” Use dedicated trays for sintering only.