Qfx Default Password May 2026

(insecure playbook snippet):

set system login user admin uid 2000 set system login user admin class super-user set system login user admin authentication plain-text-password # (set admin password) set system root-authentication ssh-rsa "ssh-rsa AAAAB3..." # key-only, or set system root-authentication load-key-file /var/tmp/root_key.pub delete system root-authentication plain-text-password 4.3 Enforcing Password Policies set system login password format sha512 set system login password minimum-length 12 set system login password change-type user-set 4.4 Saving Configuration to Prevent Reversion After committing, save to both rescue and backup: qfx default password

Press Enter . You will see:

load factory-default commit The root password is cleared. The switch reverts to root: (blank). (insecure playbook snippet): set system login user admin

login: root Password: Press Enter at the password prompt. You are now logged in as root. If the switch has been configured for serial over LAN but the password was later cleared (e.g., via load factory-default ), the same blank password applies. 2.3 SSH – Not Enabled by Default Contrary to some misconceptions, SSH is not enabled out of the box. If you try: login: root Password: Press Enter at the password prompt

Introduction In the world of data center networking, Juniper’s QFX Series switches are ubiquitous. Designed for high-performance leaf-and-spine architectures, EVPN-VXLAN fabrics, and large-scale Layer 2/Layer 3 environments, these switches are powerful—but like all network devices, they begin their life in a vulnerable state. At the heart of that vulnerability lies a simple, often-overlooked question: What is the default password on a QFX switch?

#!/bin/bash # qfx_check_default_pass.sh SWITCHES="qfx1 qfx2 spine1 spine2" for sw in $SWITCHES; do echo -n "$sw: " ssh -o BatchMode=yes -o ConnectTimeout=3 root@$sw "show version" 2>/dev/null && \ echo "SUCCESS (has SSH key)" || \ sshpass -p '' ssh -o StrictHostKeyChecking=no root@$sw "show version" 2>/dev/null && \ echo "FAIL - DEFAULT PASSWORD" || \ echo "OK - password protected or unreachable" done Alternatively, use Juniper’s health or audit automation scripts from the Junos Space platform. The QFX default password is not a secret—it’s the absence of a secret. A blank root password is a default that must be changed on day zero, hour zero, minute zero . In modern data centers, where east-west traffic dominates and compromised switches can eavesdrop on VXLAN tunnels, leaving a QFX with no password is equivalent to leaving the data center door unlocked with a sign saying “Valuable Servers Inside.”