Sofortiger Zugang zu Daten in verschlüsselten BitLocker-, FileVault 2-, PGP Disk-, TrueCrypt- und VeraCrypt-Festplatten und -Container. Das Tool extrahiert kryptografische Schlüssel aus RAM-Abbildern sowie Ruhezustands- und Auslagerungsdateien und verwendet Klartext-Passwörter oder Escrow Schlüssel, um alle Dateien und Ordner zu entschlüsseln, die in Krypto-Archiven gespeichert sind. Verschlüsselte Datenträger werden für den sofortigen Echtzeitzugriff unter einem neuen Laufwerksbuchstaben gemountet.
Unterstützt: verschlüsselte Archive von BitLocker (einschließlich TPM-Konfigurationen), FileVault 2 (einschließlich APFS-Volumes), LUKS, PGP Disk, TrueCrypt und VeraCrypt und vollständige Festplattenverschlüsselung, BitLocker To Go, XTS-AES BitLocker-Verschlüsselung, Jetico BestCrypt, RAM-Dumps sowie Ruhezustands- und Auslagerungsdateien.
| Common license | $ 699 |
To inspect the header:
# For AM62x SK EVM make am62x_evm_r5_defconfig make CROSS_COMPILE=arm-none-eabi- # or arm-linux-gnueabihf- ./spl/tiboot3.bin tiboot3.bin
| Offset | Size (bytes) | Field | Description | |--------|--------------|-------------------|--------------------------------------------------| | 0x00 | 4 | magic | 0x4152544C ("ARL") for ARM boot | | 0x04 | 4 | version | Header version (0x1 or 0x2) | | 0x08 | 4 | entry_point | Execution address (e.g., 0x41C00000 ) | | 0x0C | 4 | load_addr | Where ROM should copy the image | | 0x10 | 4 | image_size | Size of binary after header | | 0x14 | 4 | crc32 | Checksum | | 0x18 | 4 | flags | Security & boot flags | | ... | ... | ... | | | 0x40 | start | actual R5F code | Executable payload | On HS devices, the header is followed by a signature certificate. 0x41C00000 - 0x41C3FFFF OCRAM (256KB) – tiboot3.bin loaded here 0x41C00000 Entry point 0x41C04000 Stack 0x41C20000 Scratch / Heap Note: Some larger K3 devices load tiboot3.bin into a dedicated R5F TCM. 7. Build & Customization To rebuild or inspect: To inspect the header: # For AM62x SK
| Filename | Use case | |--------------------------------|-----------------------------------------------| | tiboot3.bin | Generic, defaults to R5 SPL | | tiboot3-strict.bin | Secure boot enforcement (no fallback) | | tiboot3-<board>-evm.bin | Board-specific configuration | | tiboot3_combined.bin | Includes SYSFW inside (for small boot media) | tiboot3.bin is a small but critical piece of the boot chain for TI K3 processors. It acts as the trusted first-stage loader running on the Cortex-R5F, handling low-level hardware initialization and security before handing off to U-Boot SPL ( tispl.bin ) and ultimately Linux. Debugging boot issues on K3 platforms should always start by confirming that tiboot3.bin is correctly built, signed (if HS), and placed on the boot media with the correct header. Report prepared for engineering use. For exact register-level details, refer to the Technical Reference Manual (TRM) of your specific TI K3 SoC. | | | 0x40 | start | actual
| Common license $ 699 |
16 August, 2022
Elcomsoft Distributed Password Recovery 4.45 unterstützt Windows Hello-PIN-Codes und LUKS2-Verschlüsselung28 December, 2021
Elcomsoft fügt Unterstützung für BestCrypt Volume Encryption 5 hinzu3 June, 2021
ElcomSoft knackt die neueste Version von VeraCrypt17 December, 2020
Elcomsoft verdoppelt Geschwindigkeit der Passwort-Wiederherstellung mit NVIDIA Ampere - BestCrypt-Container werden entschlüsselt20 October, 2020
Elcomsoft öffnet verschlüsselte virtuelle Maschinen für Forensiker18 August, 2020
ElcomSoft knackt mit LUKS verschlüsselte Festplatten