Mindenféle finomság, hogy zakatoljanak gépeid!
Innen bármikor letöltheted a munkádhoz szükséges programokat, profile-okat, egyebeket.

Driverek Roland eszközökhöz

Bármilyen Roland eszközöd van, a hozzávaló drivert, firmware-t, leírásokat, update-ket először a Roland Download Centeren keresd.

Roland VersaWorks 7 RIP telepítő

VersaWorks 7 telepítő
Roland VersaWorks 7 telepítő (letöltés)
A telepítőt rendszergazda módban tessék telepíteni.

Roland VersaWorks RIP program



VersaWorks 6 telepítő
Roland VersaWorks 6.20.0 telepítő (letöltés)
Roland VersaWorks 6.24.2 updater (letöltés)
Az offline updater telepítőket az alapprogram telepítése után, futtatás rendszergazdaként módban tessék telepíteni !!!





train station renovation move the locomotive on the turntable



VersaWorks Dual 1.6 telepítő
VersaWorks Dual 1.6.8 full install (letöltés)
VersaWorks Dual 1.6.15 updater (letöltés)
Az offline updater telepítőket az alapprogram telepítése után, futtatás rendszergazdaként módban tessék telepíteni !!!





train station renovation move the locomotive on the turntable



VersaWorks 5 telepítők
VersaWorks 5.22 full install (letöltés)
VersaWorks 5.5.1 updater (letöltés)
Az offline updater telepítőket az alapprogram telepítése után, futtatás rendszergazdaként módban tessék telepíteni !!!






train station renovation move the locomotive on the turntable

CutStudio vágó program
Roland CutStudio install (3.14 full install) (letöltés)






train station renovation move the locomotive on the turntable

BN-20 utility program
BN-20 nyomtatódhoz a utility programot és update-jeit innen tudod letölteni. (letöltés)






train station renovation move the locomotive on the turntable

PrintServer-NetTool
Ezzel a kis programmal megtudod keresni a hálózaton a nyomtatód IP címét, vagy a háló kártya reset-elése után új IP címet tudsz adni neki
Ez olyan modelleknél érdekes, ahol nincs a menüben lehetőség megadni az IP címet. pl. SP-540v típus. (letöltés)



Advanced IP Scanner

Advanced IP Scanner
Vagy ezzel az ingyenes eszközzel még mélyebben rá tudsz nézni a hálózatra, hogy milyen eszközök lógnak rajta és azoknak mi az IP címük. (link)

train station renovation move the locomotive on the turntable

Copeck riport
Ezzel a kis programmal a nyomtatód összes belső beállítási értékét, élettörténetét el tudod menteni egy riport file-ba, amit hozzánk elküldve mi kielemzünk és megmondjuk mit tegyél a hiba elhárításának érdekében. (letöltés)




On The Turntable: Train Station Renovation Move The Locomotive

The old turntable at the Whistle Stop Depot hadn’t turned in twenty years. Rust had frozen its gears, and weeds claimed the surrounding pit. But with the station’s renovation finally approved, the centerpiece had to work again: the historic locomotive No. 7 needed to be moved from its forgotten siding into the new heritage display.

Crews began by draining the rain-clogged turntable well. They sandblasted the central pivot and replaced every bolt on the bridge. A new electric motor replaced the hand-cranked winch. After weeks of work, the day came to test it. The old turntable at the Whistle Stop Depot

With a deep groan, the turntable shivered—then slowly, smoothly, rotated. Workers guided No. 7 onto the bridge. The locomotive’s weight settled with a satisfying clank. Then, with a gentle hum, the table began to turn, aligning the engine perfectly with the restored roundhouse track. 7 needed to be moved from its forgotten

For the first time in a generation, the locomotive faced the main line again. The renovation wasn’t just about steel and switches; it was about bringing a piece of the past back onto the right track. A new electric motor replaced the hand-cranked winch